Set Common Credentials

If you have a set of common credentials for devices, use “Dynamic” to set them:

  1. Click the [Inventory] main tab.

  2. Click the [Inventory] menu.

  3. Click [Credentials] in the dropdown menu.

  1. Enter the address range of the network group in the [Add Address] field, and click the button.

  1. Fill in login information near the bottom right of the right panel.

It is possible to omit inputting items that are not required.

Item Explanation
VTY Username /VTY Password Enter the username/password required to log in to the network device.
Enable Username /Enable Secret/Password Enter the username/password to enter enable mode.
SNMP Get Community Enter the SNMP community to use when making an SNMP Get request.
SNMPv3 Authentication Username Enter the authentication username defined in SNMPv3.
SNMPv3 Authentication Password Enter the password for the community defined in SNMPv3.
SNMPv3 Privacy Password Enter the password used for encryption when communicating via SNMP.
Database Username Enter the database username.
Database Password Enter the database password.
SSH Private Key Set private key for logging into the device.
  1. Click [OK] to save your settings.

Set Credentials for Each Device

If you are setting different credentials for each device, use “Static” to set them.

  1. Click the [Inventory] main tab

  2. Click the [Inventory] menu.

  3. Click [Credentials].

  1. Select a network, and click [OK].

  2. Click the button under the “Network Groups” left sidepanel, or click the [Add new network group] button.

  1. Enter the network group name, select “Static”, and click [OK].

  1. Click the button.

  1. In the “Credential Set” window, enter the IP address and set each item.

It is possible to omit items that are not required.

Item Explanation
IP address Enter the IP address of your network device.
VTY Username /VTY Password Enter the username/password required to log in to the network device.
Enable Username /Enable Secret/Password Enter the username/password to enter enable mode.
SNMP Get Community Enter the SNMP community to use when making an SNMP Get request.
SNMPv3 Authentication Username Enter the authentication username defined in SNMPv3.
SNMPv3 Authentication Password Enter the password for the community defined in SNMPv3.
SNMPv3 Privacy Password Enter the password used for encryption when communicating via SNMP.
Database Username Enter the database username.
Database Password Enter the database password.
SSH Private Key Set private key for logging into the device.
  1. Click [OK] to save your settings.

From revision 20240131.0729, database monitoring for Postgres/MySQL/MariaDB is supported.